BSTCALTEK

Product information

BT604 - 2 in 1 Intelligent Telephone & LAN Cable Tester with Caller ID & Network Ping Test

Be the first to review this product

Quick Overview

BT604 is a hand-held instrument which let you test and qualify the network media and transmission conveniently. The tester can be recommended when the installation and maintenance of fast Ethernet and corded telephone networks with UTP cables are required.  BT604 comprises triple functions, which are Ping test, LAN cable test and Telephone. This document describes how to apply test functionalities to network environment properly. User can follow below operational procedures conveniently.


 Download Specification: BT604.pdf

BT604 - 2 in 1 Intelligent Telephone & LAN Cable Tester with Caller ID & Network Ping Test

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

BT604 is a hand-held instrument which let you test and qualify the network media and transmission conveniently. The tester can be recommended when the installation and maintenance of fast Ethernet and corded telephone networks with UTP cables are required.  BT604 comprises triple functions, which are Ping test, LAN cable test and Telephone. This document describes how to apply test functionalities to network environment properly. User can follow below operational procedures conveniently.

Features

1. Ping Test

Ping test function verifies the operation of fast Ethernet network(10BASE-T, 100BASE-TX ). User can configure device IP, subnet mask, default gateway and also destination IP.

A.    Automatic configuration - DHCP(Dynamic Host Configuration Protocol)

DHCP supports automatic network configuration. User can follow below procedure to execute ping test using DHCP function.

B.    Manual configuration - Static IP

Static IP requires manual network configuration. User can follow below procedure to execute ping test using static ip method.

2. LAN(Local Area Network) Cable Test

LAN cable test function determines the physical defect of cable. It examines each wire of the cable core in order of pin number of connector. The test result can be checked by 8 LED indicators in master and remote module in real-time by reading flash sequence of each LED. User can follow below procedure to execute LAN cable test function.

3. Telephone

Telephone function verifies suitability of the telephone network by a phone call. Operation method is same as the regular corded phone so that user can send and receive a phone call by a hook switch.  Additional feature of telephone mode is a line search. By line search function, user can find a pair of the telephone cable ends out of bundles. User can follow below procedure to execute telephone function.


Features details:

- Supports integrated Data-communication and Tele-communication test functionalities

- Supports ping test:

  Fast Ethernet media access (10BASE-T, 100BASE-TX)

  Auto configuration for network media (Auto Negotiation: 10/100Mbps, Full/Half duplex)

  Auto MDI/MDI-X crossover  (Direct/Cross dual cable types are supported)

  Static IP and DHCP configuration interface

- Supports physical connection function test:

  Each wire(8-pin) connection test of LAN cable

  Cable search test of telephone cable

- Supports high-end telephone function test:

  Caller ID demodulation

  DTMF dialing

  Speakerphone

- Easy-To-Carry

- Easy-To-Use


Specifications

[Corded telephone] 

Caller ID Standard

Bell 202A

- Modulation: FSK

- Mark   (1): 1200+/-12Hz

- Space  (0): 2200+/-22Hz

- Transmission rate: 1200+/-12baud

Dialing Method

DTMF

Line Impedance

600Ohm

Speakerphone

Supported

 

 [LAN cable test] 

Test Method

Each wire(8-pin) connectivity

 

[Ping test] 

Network Standard

IEEE 802.3/802.3u

Media Compatibility

10BASE-T, 100BASE-TX

- Auto-negotiation Supported

- 10/100Mbps, Full/Half duplex

MDI/MDI-X

Auto-crossover Supported

 

[General] 

Connector

RJ-45, RJ-11

Display

2.3” Mono Graphic LCD(/w Backlight)

Dimensions

(width x height x depth)

Master - 84.1mm x 188mm x 34.9mm

Remote - 84.1mm x 60mm x 37.1mm

Weight

(w/o Battery)

Master - 230g(8.1oz.)

Remote - 60g(2.1oz.)

Battery

Master - 9V Alkaline(6LR61)

Remote - 9V Carbon-Zinc(6F22)

Operating (Storage)

Temperature

10℃ ~ 40℃ (-10℃ ~ 60℃)

Relative Humidity

90%

 

Content/Accessories :

- Master module

- Remote module

- User’s manual

 

Optional Accessories:

- TBA

 

Standards:

- Caller ID Standard: Bell 202A

- Network Standard: IEEE 802.3/802.3u

You may also be interested in the following product(s)

BS35 - High Precision TDR LAN Cable Tester

BS35 - High Precision TDR LAN Cable Tester

BT601 - Cable Scan & Wire Finder

BT601 - Cable Scan & Wire Finder

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.