Product information
Details
The BS33 is very unique in the market as it can quickly measure the length if any reeled wire Copper (Cu) or Aluminum (Al) up to 30,000m (100,000ft) and with the gauges from 0.15mm² to 240mm².
Within seconds, cable up to 30,000m can be measured and digitally displayed without the cumbersome unrolling of cable reels. Very useful for electrical contractors, utilities and distributors to control inventories of wire.
In Standard mode, BS33 can quickly measure length of any reeled wire up cable of Copper (Cu) or Aluminum (Al) up to 30,000m (100,000ft) with the gauges from 0.15mm² to 240mm². Length of the cable can be digitally displayed without the cumbersome unrolling of cable reels within a few seconds. Built in automatic temperature compensation for changes in ambient temperature to ensure accuracy of measurement. The BS33 can also be used as a precision milliohm meter to measure the cable resistance.
In User Select mode, BS33 allows users to save up to 8 sets resistance of an unknown gauges wires (Optimise for cables gauge up to 4mm2); hence to provide reading of the cable length.
BS33 can widely apply to the industry for electrical contractors, utilities and cable distributors to control trading & inventories of cable/wire, factory incoming checking, daily operation consumption measure…etc.
Features:
- 4 digit display with annunciators
- Measures in FEET (ft) or METERS (m)
- Direct readout for both COPPER (Cu) or ALUMINUM (Al) wire
- Standard Mode, wire gauge range from 0.15mm² to 240mm²
- Automatic temperature compensation for changes in ambient temperature to ensure accuracy of measurement (Standard Mode)
- User Select Mode with 8 memory locations (Optimise for cables gauge up to 4mm²)
- Resistance range for milliohm measurements
- User calibration mode, Calibration standard wire included
- Sleep mode
- Easy-to-use
- Low battery indicator
- High precision gold plated very low contact resistance Kelvin Clip test lead set included
General Specification:
| Measurement Range: | 0.1 to 30,000m (100,000ft) |
| Cross Section Ranges: | Standard Mode: 0.15 mm2 to 240mm2 User Select Mode: 0.15 mm2 to 4.0mm2 |
| Basic Accuracy: | ±(1% of reading + 1m or 3ft)<100m or 300ft at 18 °C to 23°C ±(1% of reading)> 100m or 300ft at 18 °C to 23°C ±(2% of reading + 1m or 3ft) <100m or 300ft below 18 °C and above 23°C ±(2% of reading)> 100m or 300ft below 18 °C and above 23°C |
| Resistance Range: | 0 to 10W: ±(0.5% of reading + 3LSD) 10 to 99.99W: ±(0.5% of reading + 10LSD) |
| Resolution: | 0.1m or 0.5 feet(Length) 1mW(Resistance) |
| Operating Humidity: | 20% to 80% RH |
| Operating Temperature: | 0°C to 40°C |
| Weight: | Approx. 587 g. (with holster) |
| Battery Type: | Single standard 9 volt battery, NEDA 1604, 6F22, 006P |
| Sleep mode: | After 15 minutes(Approx.) |
| Dimension: | 100 (W) x 203 (H) x 47 (D) mm. (with holster) |
Accessories:
- Battery, 9V (BT1)
- Kelvin Clip test leads (KC1)
- Rubber Boot (Blue) (C1B)
- User’s manual (English)
Optional Accessories:
- Soft Carrying Case (S1C)
Standard:
- CE-mark
- UL 1244
- EN 61010-1
- CSA C22.2 No.231
- EMC Directive
You may also be interested in the following product(s)
BS34 - High Precision TDR Cable Length Meter
US$0.00
|
Check items to add to the cart or select all
You have no items to compare.
