Product information
Details
Features:
- 3 1/2 digits LCD display
- DC Voltage 200mV to 600V
- AC Voltage 200V/600V
- DC Current 20mA/200mA
- Resistance 200Ω to 2MΩ
- Diode Test
- Continuity Test
- 1.5V & 12V Battery Test
- Square Waveform Output
- Phase Sequence Indication
- Live Wire Verification
- With Optional Add-On Clamp
- Conforms to EN61010-1 CAT II 600V
Electrical Specification:
Accuracies are ±(% of reading + number of least significant digits) at 23°C±5°C, less than 75%RH
DC Voltage Measurement
Range |
Resolution |
Accuracy |
Input Impedance |
Overload Protection |
200mV |
0.1mV |
±(1.0% + 3d) |
10MΩ |
600V DC/AC rms |
2V |
1mV |
|||
20V |
0.01V |
|||
200V |
0.1V |
|||
600V |
1V |
AC Voltage Measurement
Range |
Resolution |
Accuracy |
Input Impedance |
Overload Protection |
200V |
0.1V |
±(1.2% + 3d) |
10MΩ |
600V DC/AC rms |
600V |
1V |
Frequency range: 40-400Hz
DC Current Measurement
Range |
Resolution |
Accuracy |
Voltage drop |
Overload Protection |
20mA |
0.01mA |
±(1.2% + 3d) |
200mV |
250V DC/AC rms <30 sec. |
200mA |
0.1mA |
Resistance Measurement
Range |
Resolution |
Accuracy |
Open circuit voltage |
Overload Protection |
200Ω |
0.1Ω |
±(1.2%. + 3d) |
<1V |
250V DC/AC rms <30 sec. |
2kΩ |
1Ω |
|||
20kΩ |
0.01kΩ |
|||
200kΩ |
0.1kΩ |
|||
2MΩ |
1kΩ |
Diode Test
Range | Accuracy | Open circuit voltage | Overload Protection |
Approx. 1mA ±0.6mA | < 3V | 250V DC/AC rms<30 sec. |
Continuity Test
Range | Buzzer sounds when resistance value < 30Ω | Open Circuit Voltage | Overload Protection |
< 3V | 250V DC/AC rms<30 sec. |
Square Waveform Output
Range | Output Voltage | Frequency | Wave Form | Overload Protection |
Approx. 3V | 50Hz | Square Wave | 250V DC/AC rms<30 sec. |
Phase Sequence Indication & Live Wire Verification
Range | Phase Sequence Indication | Live Wire Verification Voltage |
380ACV ±10% | Correct Phase Sequence– Phase Sequence Light “ON” | 100~250V |
Battery Test
Range |
Load Resistance |
Estimate Resistance |
1.5V |
150Ω |
Ri=(V1-V2)/R0 |
12V |
900Ω |
General Specifications:
Display | : | 3 1/2 digits LCD with max. reading of 1999. |
Polarity | : | Automatic, (-) negative polarity indication. |
Zero adjustment | : | Automatic. |
Over range indication | : | Only the MSD “1” is displayed. |
Power | : | 1.5V AAA battery x 3 |
Dimension | : | 85 (W) x 155 (H) x 40 (D) mm. |
Weight | : | Approx. 250 g (including battery). |
Standard Accessory:
Test Lead Set (2pcs) |
´ 1 set |
Rubber Holster with Test Lead Holder |
´ 1 pc |
3 Phase 3rd Test Lead |
´ 1 pc |
Optional Accessory:
Add-On Clamp Head |
´ 1 set |