Product information
Details
Features:
- AC voltage 200V/600V
- Resistance 200W to 2MW
- Continuity Test
- Capacitance 20uF/200uF
- With Optional Add-On Clamp
- DC Voltage 200mV to 600V
- DC Current 20mA/200mA
- Diode Test
- Transistor Test
- Phase Sequence Indication
- Conforms to EN61010-1 CATII 600V
Electrical Specification
Accuracies are ±(% of reading + number of least significant digits) at 23°C±5°C, less than 75%RH
DC Voltage Measurement
Range |
Resolution |
Accuracy |
Input Impedance |
Overload Protection |
200mV |
0.1mV |
±(1.0% + 3d) |
10MW |
600V DC/AC rms |
2V |
1mV |
|||
20V |
0.01V |
|||
200V |
0.1V |
|||
600V |
1V |
AC Voltage Measurement
Range |
Resolution |
Accuracy |
Input Impedance |
Overload Protection |
200V |
0.1V |
±(1.2% + 3d) |
10MW |
600V DC/AC rms |
600V |
1V |
Frequency range: 40-400Hz
DC Current Measurement
Range |
Resolution |
Accuracy |
Overload Protection |
20mA |
0.01mA |
±(1.2% + 3d) |
250V |
200mA |
0.1mA |
Resistance Measurement
Range |
Resolution |
Accuracy |
Testing Voltage |
Overload Protection |
200W |
0.1W |
±(1.2% + 3d) |
<1V |
250V DC/AC rms <30 sec. |
2kW |
1W |
|||
20kW |
0.01kW |
|||
200kW |
0.1kW |
|||
2MW |
1kW |
Capacitance Measurement
Range |
Resolution |
Accuracy |
Overload Protection |
20mF |
10nF |
±(2.5% + 3d) |
250V DC/AC rms <30 sec. |
200mF |
100nF |
Test Frequency: Approx. 2.5Hz
Test voltage: 3V
Diode Test
Range | Open circuit voltage | Overload Protection |
< 3V | 250V DC/AC rms<30 sec. |
Continuity Test
Range | Buzzer sounds when resistance value < 30W | Open circuit voltage | Overload Protection |
<. 3V | 250V DC/AC rms<30 sec. |
Transistor Test
Range | hFE value | Overload Protection |
hFE | 0-1000 | 250V DC/AC rms<30 sec. |
Phase Sequence Indication
Range |
Phase Indication |
380V~ ±10% |
Correct Phase Sequence – Phase Sequence Light “ON” |
General Specifications:
Display | : | 3 1/2 digits LCD with max. reading of 1999. |
Polarity | : | Automatic, (-) negative polarity indication. |
Zero adjustment | : | Automatic. |
Over range indication | : | Only the MSD “1” is displayed. |
Power | : | 1.5V AAA battery x 3 |
Dimension | : | 85 (W) x 155 (H) x 40 (D) mm. |
Weight | : | Approx. 250 g (including battery). |
Standard Accessory:
Test Lead Set (2pcs) | x 1 set |
Rubber Holster with Test Lead Holder | x 1 pc |
3 Phase 3rd Test Lead | x 1 pc |
Optional Accessory:
Add-On Clamp Head |
x 1 set |