Product information
Details
The BS8000 CRT Readout series offers the “Auto Timebase” to select the best sweep rate depending on the type of input signals, hence to obtain the optimum result for the user. Its’ on screen cursor function is able to handle 7 parameter of measurements with frequency counting simultaneously.
Feature:
- High Sensitivity (1mV/Div)
- Digital Switch
- Display seven cursor readout parameter on CRT screen
- Hold-off time adjustable, complex signal sync more stable
- Have all Feature with universal oscilloscope
- CE Approved, CATII 600V CE-EMC & LVD
Specifications
Vertical System |
|
Defection Ratio |
1mV/Div - 5V/Div (1-2-5 12 steps) |
Variable Ratio |
> 2.5:1 |
Bandwidth |
5mV - 5V/Div (DC - 20MHz) |
1mV - 2mV/Div (DC - 10MHz) |
|
AC Coupling |
Freq. Min 10Hz |
Rise Time |
5mV - 5V/Div (17.5ns) |
1mV - 2mV/Div (35ns) |
|
Transient Response |
Overshot < 5% |
Damp <5% |
|
Mode |
CH1, CH2, Dual, Add |
Polarity Inverter |
CH2 ONLY |
Input Impedance |
1Mohm ± 5%, 17pF |
Maximum Voltage |
400V (DC+AC peak) Freq. <1kHz |
Delay Time |
View the Raise of Signal |
Channel Insulate |
30:1 (20MHz) |
CMR |
1000:1 (50kHz) |
Horizontal System | |
Mode | A |
A Sweep Rate | 0.1us/Div - 0.5s/Div (1-2-5 21 steps 5%) |
Polarity | +, - |
Coupling | AC, High Frequency Reject, TV, DC, (TV-V, TV-H) |
Triggering Sensitivity | DC - 20MHz, 1.5Div, Ext.0.2V |
Triggering Mode | Auto, Normal, Single Time |
Level Lock & Alt Trig | 50Hz - 20MHz, 2Div, Ext. 0.25V |
External Impedance | 1Mohm ± 2%, 35pF |
Maximum Input | 100V (DC+AC peak) Freq. <1kHz |
X-Y Mode | |
Sensitivity | Y same as CH2, X same as CH1 ± 5%; MAG X10 ±10% |
X Bandwidth | DC - 2MHz |
Phase Error | < 3 degree |
Z Axis | |
Range | TTL Level |
Frequency Range | DC - 5MHz |
Input Impedance | 5kOhm |
Maximum Input Voltage | 50V (DC + AC peak), Freq. <1kHz |
Cursor Readout | |
Cursor Measurement | ΔV, ΔV%, ΔVdB, ΔT, 1/ΔT, Duty, Phase |
Cursor Display Mode | Variable, Base |
Cursor Revolution | 1/25Div |
Cursor Range | Vertical: ±3Div |
Horizontal: ±4Div | |
Panel Setup | V/Div, Vertical Mode, Ch2 Inverter, ALT/CHOP, UNCAL, ADD(SUB), X10, X-Y, AT/D, TC-V/H |
Calibration | |
Waveform | Rectangle: 1kHz±2%, 50Hz±2Hz |
Amplitude | 2Vpp ± 2% |
Power Supply | AC: 220V ± 10% |
Consume | 40W |
CRT | |
Type | 6 Inch, Rectangle |
Acceleration Voltage | Approx. 15kV |
Other | |
Working Environment | 0 - 40 degree C / 85% |
Storage Environment | -10 - 60 degree C / 70% |
Dimension/Weight | 150 x 310 x 440 mm / 8kg |